Yaesu fusion new software for wires X

Discuss topics around Digital Radio modes such as DMR, Fusion etc
User avatar
M0VMT
Posts: 1005
Joined: Thu Sep 27, 2018 10:23 pm
Location: Doncaster

Yaesu fusion new software for wires X

Unread post by M0VMT »

Yaesu have released new software that allows the ft2d ftm100d and the 400 to access wires x without the need for a HRI200, I have just bought the ft2d to join in wires x and I have updated it to run HRI and PDN modes which is a faff but nothing too hard if you follow John Kruck n4upc from Yaesu USA advise on youtube it is simplified.
Lots of interesting stuff happening with fusion right now and this new software rules out having to have 2 radios to use wires x, the only downside is you cannot have a node like a HRI200 but you have your own access point in the house but again it would need another radio.
I am happy just using 1 radio and using wires x and it will fulfil my needs for now, the kit I need is a scu39 cable which is out of stock typical and a laptop which I have so take a look on youtube if it of interest.
Their is four vids here that will explain the above
https://youtu.be/DogOJR1Kcl8
https://youtu.be/iiyUZsG0cSQ
https://youtu.be/Wx2aRzI2nbQ
https://youtu.be/lh53gaC28hw
M0VMT Mark
Doncaster
RSARS
Happy to be here :D
User avatar
M0VMT
Posts: 1005
Joined: Thu Sep 27, 2018 10:23 pm
Location: Doncaster

Re: Yaesu fusion new software for wires X

Unread post by M0VMT »

The cable kit may be in stock at the end of March emphasis on may :roll:
M0VMT Mark
Doncaster
RSARS
Happy to be here :D
M0BVL(Silent Key)
Posts: 76
Joined: Sat Sep 29, 2018 7:27 pm
Location: Sheffield
Contact:

Re: Yaesu fusion new software for wires X

Unread post by M0BVL(Silent Key) »

It's a tad expensive ,can you use c4fm over internet with radio ,pc and the su20 cable only is using the radio as the AD converter?
It's not broke yet ! ...just give me a minute.
User avatar
M0VMT
Posts: 1005
Joined: Thu Sep 27, 2018 10:23 pm
Location: Doncaster

Re: Yaesu fusion new software for wires X

Unread post by M0VMT »

M0BVL wrote: Sat Mar 02, 2019 8:48 pm It's a tad expensive ,can you use c4fm over internet with radio ,pc and the su20 cable only is using the radio as the AD converter?
Unfortunately Russ they have not released the software for direct access for your 991 mate but you could get a shark openspot and fly into the FCS and YSF reflectors on c4fm but if you want to do wires you will need a whole lot of more kit Sorry.
M0VMT Mark
Doncaster
RSARS
Happy to be here :D
M0BVL(Silent Key)
Posts: 76
Joined: Sat Sep 29, 2018 7:27 pm
Location: Sheffield
Contact:

Re: Yaesu fusion new software for wires X

Unread post by M0BVL(Silent Key) »

Lol thought as much ,a friend is trying it with his 400de but i recon you need the 40 cable kit
It's not broke yet ! ...just give me a minute.
User avatar
M0VMT
Posts: 1005
Joined: Thu Sep 27, 2018 10:23 pm
Location: Doncaster

Re: Yaesu fusion new software for wires X

Unread post by M0VMT »

As of yet no release for the 991 and I don't think they will, I have been trying to get the ftm100 to do wires with the cable kit but no success at all.
M0VMT Mark
Doncaster
RSARS
Happy to be here :D
Post Reply