Transverters

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review
   

Expand view Topic review: Transverters

Re: Transverters

by G0DJA » Mon Sep 16, 2019 5:48 pm

Very nice looking units.

I have the Kuhne boxes to make up a 10GHz to 432MHz transverter which I need to put together again, and I was given an old narrowband transverter for 24GHz that a friend realigned for the part of the band that is now in use. The other problem is that it uses a switch to swap from transmit to receive, so needs a bit of manual intervention...

I'll take some photos and post them up when I get a moment.

Cheers - Dave (G0DJA)

Re: Transverters

by M0XXQ » Sun Oct 07, 2018 8:38 am

Hi Iain many thanks for the write up, it always amazes me how people manage to build kit for those high frequencies as the thing likes inductors and capacitors must be very challenging to fabricate.
If you have any videos you would like to post up feel free to use the Video URL Insert icon in the editor.

Cheers

Rob.

Re: Transverters

by M0VMT » Sat Oct 06, 2018 4:22 pm

Interesting and I have to admit I've plenty to learn on this subject, great thread starter thanks.
Mark

Transverters

by VK5ZD » Sat Oct 06, 2018 3:01 pm

Since there's not much in this section yet I thought I'd kick it off with some pictures of a recently completed project, namely transverters for 24GHz, 47GHz, 76GHz and 122GHz. Each transverter is in the same sized diecast box which fit a common dish antenna.

IMG_20181007_001254.jpg
As well as the 4 transverters, the cases hold the FT-817 I.F. radio, a 10MHz OCXO reference, 3 LiPo batteries (3 cell) and a boost converter to maintain 12.5v output from the batteries (which are nominally 11.1v). The necessary power and coaxial cables are also kept in the cases.

IMG_20180903_121112.jpg
The transverters sit in the lower cradle. Each has a waveguide feed that illuminates a sub-reflector fixed in the dish.

IMG_20180903_121705.jpg
The FT-817 sits on top and the 10MHz reference is attached to the side with velcro.

Top