{"id":192,"date":"2024-12-27T08:29:46","date_gmt":"2024-12-27T08:29:46","guid":{"rendered":"https:\/\/hamradiotoday.uk\/meteorscatter\/?page_id=192"},"modified":"2024-12-30T10:06:56","modified_gmt":"2024-12-30T10:06:56","slug":"getting-started-with-meteor-scatter","status":"publish","type":"page","link":"https:\/\/hamradiotoday.uk\/meteorscatter\/getting-started-with-meteor-scatter\/","title":{"rendered":"Getting Started with Meteor Scatter"},"content":{"rendered":"\n\n\n\n\n<p>If you&#8217;re new to Meteor Scatter or even Amateur Radio, I&#8217;d suggest reading the introductory article on Meteor Scatter located <a href=\"https:\/\/hamradiotoday.uk\/meteorscatter\/what-is-meteor-scatter\/\">here<\/a>.<\/p><p><\/p><p><br><\/p>\n<h2>Bands\/Frequencies.<\/h2>\n<p>Meteor Scatter operation can be acheived on the following VHF bands:<br><\/p>\n\n10M 28MHz\n6M 50MHz\n4M 70MHz\n2M 144MHz\n\n<p class=\"MsoNormal\">Firstly, I&#8217;ll explain why I&#8217;ve included 10M 28MHz in the\nlist of VHF Bands, as experienced Amateur Radio Operators we know that 28MHz is\nat the top end of the HF Spectrum, however it is a bit of a strange band as it\nexhibits many behaviours of a VHF band such as being able to work Sporadic E\nlayer openings, Tropospheric Ducting and in the case of this article, Meteor\nScatter.<br>\n<br>\nBut how do we know we&#8217;re actually communicating with another station on 28MHz\nusing Meteor Scatter and not Sporadic E or F2 Layer propagation modes?<br>\n<br>\nWell as experienced operators who&#8217;ve used VHF and operated MS on the higher\nbands will know that, the difference between an MS ping or burst is characterised\nby duration, intensity and as previously discussed, Doppler Shift.<br>\nLet\u2019s take an example of two stations working an MS Sked on 10M, one located in\nthe UK and the other located in Germany, they&#8217;re setup and ready on 28.145MHz (<i>the\nnon-official MS centre of activity, we&#8217;ll discuss this further on<\/i>) using\nthe MSK144 Data mode on a 15 Second Transmit\/Receive Sequence Duration.<br>\n<br>\nWhen the station based in the UK receives a burst of data from the station in\nGermany, this burst may last the full period of the 15 second receive cycle and\nmay also see the same long burst during the next receive cycle thus this would\nindicate another mode of radio wave propagation is at work here, such as\nSporadic E or Tropospheric Ducting.<br>\nIf however on the receive cycles, each station is noting several seconds of a\nreceived burst of data, let\u2019s say 2 or 7 seconds long with varying intensity\nthen this is most probably a Meteor reflection.<br>\n<br>\nIt\u2019s also interesting to understand that as you go up in frequency from 28MHz\nto the 6 Metre band, 50MHz, the duration of the Meteor Reflections get shorter,\nwhat would be a 3 or 5 second burst on 28MHz may well only be a 1 or 2 second\nburst on 50MHz and the same reduced duration the higher you go &#8211; 144Mhz, the 2M\nVHF band is a more challenging band outside of any major Meteor Shower as the\nduration of Meteor reflections are much shorter, however the advantage of the\n2M band is that you have physically smaller antenna systems with higher gain\ncompared to the lower bands.<br>\n<br>\nIn the next section of this article, I&#8217;ll outline the minimum equipment\nrequired to get started operating Meteor Scatter communications.<br>\n<!--[endif]--><o:p><\/o:p><\/p>\n<h2> Equipment.<\/h2>\n\nVHF SSB Transceiver\nDirectional Antenna\nLinear Amplifier\nAntenna Rotator\nComputer with Internet Connection\n\n<p class=\"MsoNormal\">Before you decide what band you&#8217;re going to get setup on for\nMS, there a few things to consider that&#8217;ll dictate financial cost and operating\nsuccess.<br>\nFirstly let\u2019s look at the antenna, because this&#8217;ll dictate how successful\nyou&#8217;ll be to a large degree, especially outside of major Meteor Showers &#8211; It\nwould get very boring if you had to wait 3 months for a major Meteor Shower to\noccur before you could have any MS QSO&#8217;s.<b><br>\n<br>\n28MHz, 10M Band<\/b>&nbsp;you can get started with a simple 2 Element\ndirectional antenna like a Moxon Beam, these are fairly lightweight and have a\nsmaller footprint than a standard Yagi at 28MHz.<br>\nAlmost every Amateur Radio operator has an SSB Radio capable of 28MHz with 100W\ntransmitter output power, which at this frequency is more than enough to have\nsuccessful Meteor Scatter contacts both in and outside of majors showers &#8211;\nHowever there is a but&#8230;<br>\nWhen operating an MS QSO your radio will be transmitting at 100% duty cycle on\neach transmit cycle, so make sure you have adequate forced air cooling for the\ntransceiver, the better option and at the lower frequencies more affordable\noption is to use a fan cooled Linear Amplifier, doesn&#8217;t have to be an expensive\none but the key here is to keep the radio as cool as possible, so put the load\non an external amplifier that is forced cooled &#8211; Also more power is better,\nI&#8217;ll touch on this point further on in the article.<br>\n<br>\nAs the 10M, 28MHz band is rarely used for Meteor Scatter operations, it\ngenerally isn&#8217;t the go-to band to get started with MS, however it is certainly\ngaining interest and there are a few stations around the UK and Europe who actively\nmonitor the unofficial MS centre of activity, 28.145MHz using the MSK144 data\nmode so it&#8217;s worth keeping this band in mind.<b><br>\n<br>\n<br>\n50MHz, 6M&nbsp;Band<\/b>&nbsp;is probably the easiest band to get started with\nMS as most modern transceivers come with 50MHz as standard and again, as stated\nabove, 100W and a 2 element directional antenna is enough to see some fairly\nsuccessful contacts.<br>\nHowever, at 50MHz due to the smaller antenna size it wouldn&#8217;t be unreasonable\nto think about putting up a 3 or 4 element Yagi, still fairly lightweight but\nyou&#8217;ll have much more gain on both transmit and receive.<b><br>\n<br>\n70MHz, 4M Band<\/b>&nbsp;is a brilliant band for Meteor Scatter, smaller antenna\nsize means you can increase the element count over say a 10M or 6M Yagi, the\ndownside to 70MHz 4M band is the lack of readymade equipment, but that isn&#8217;t an\nissue for technical operators as we can generally build our own.<br>\n<br>\nIn recent years with the advancement in technology has seen the likes of the\nIcom 7300 hit the market which comes as standard with the 70MHz 4M band, so its\nnot as difficult a band to get started with these days.<br>\nCouple of things to note however, as previously stated, the higher up in\nfrequency you go, the more challenging Meteor Scatter contacts will become due\nto the short duration of the Meteor reflections.<b><br>\n<br>\n144MHz, 2M Band<\/b>&nbsp;This is a very interesting band for Meteor Scatter and\nas far as antenna systems go you can achieve a lot of gain due to the smaller\nphysical footprint of a 144MHz directional antenna, the downside is that your\nsystem must be designed carefully with particular attention paid to coaxial\nfeeder lengths and quality.<br>\nAt this frequency, every fraction of a decibel counts and you must minimise the\nlosses on both receive and transmit, so the general rule is use high quality,\nlow loss coaxial cable between the radio and antenna and keep the length as low\nas possible too &#8211; Shorter the better!<br>\nAt these frequencies, transmitter power is key and put simply the more the\nbetter, 100W and a 5 Element Yagi antenna will work well during a major shower\nsuch as the Geminids but you&#8217;ll struggle outside of these showers and find that\nalthough you&#8217;ll receive another more powerful station, they&#8217;ll struggle to\nreceive you.<br>\n<br>\nA bigger financial investment is required for the 2M band and I&#8217;ll list below a\nsuggested setup that&#8217;ll give you fairly good all year round results.<o:p><\/o:p><\/p>\n\nIcom 9700 VHF\/UHF Multimode Transceiver\nGemini 2 300W Linear Amplifier\n7 Element Yagi Antenna\n\n<p class=\"MsoNormal\">The list of suggested equipment is purely based on what I\nown and use or have used previously, there are other makes and models of\nequipment that can be cheaper or more expensive depending on your budget.<br>\nIf you&#8217;re happy to work Meteor Scatter only during the major showers then you\ncan stick with a 100W Transceiver and a smaller antenna, this will give great\nresults during the Geminids, for example.<o:p><\/o:p><\/p>\n<p>My current setup consists of the following equipment<\/p>\n\nIcom 9700\nGemini 2 300W Linear Amplifier\n9 Element YU1CF Yagi\nLCF-12-50 Hardline coaxial feeder 16M long\n\n<p>My next setup once the upgrade has been completed will consist of the following<\/p>\n\nIcom 9700\n1KW Linear Amplifier\n2 x 9 Element YU1CF Yagi Antenna vertically stacked\nMasthead receive pre-amplifier with bandpass filter\nTransmit timing sequencer\nLCF-12-50 Hardline coaxial feeder 16M long\n\n<p><span style=\"font-family: &quot;Source Sans Pro&quot;, sans-serif; font-size: 17.3333px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400;\">Suggested Cable types to consider for this band would be as follows:<\/span><\/p>\n\nMessi and Paoloni Ultraflex\nLMR400\nHeliax\nLCF-12-50 Hardline\n\n<p class=\"MsoNormal\">The above-mentioned cables are a few examples of what is\navailable and what I&#8217;ve experienced using myself, however, do your own shopping\nand research first although just keep in mind your primary goal is low loss.\nThe hardline products require specialist tools to install coaxial connectors,\nand both the cable and installation tools are expensive as are the connectors,\nfor most basic getting started setups Ultraflex 10, LMR400 type cables are\nadequate.&nbsp;&nbsp;<o:p><\/o:p><\/p>\n<p class=\"MsoNormal\">Depending on the type of VHF SSB Transceiver you own or plan\nto buy, you&#8217;ll have one of several ways to interface the computer to it, on\nmost modern radio&#8217;s it\u2019s all done with a simple USB cable with the likes of the\nIcom IC 9700 and IC 7300 rigs, however if you own an older radio you may need a\nsoundcard interface to connect the radios accessory socket or even the mic and\nexternal speaker jacks.<br>\nWhichever route you take in order to interface your transceiver to your\ncomputer, the primary goal here is to allow the computer to send and receive\nthe required data packets for an MS QSO through your radio.<o:p><\/o:p><\/p>\n<h2>So lets summarise at this point on equipment.<\/h2>\n<p class=\"MsoNormal\">The lower bands are more cost effective to get going with\nMeteor Scatter operations, downside is antenna size and weight.<br>\nThe higher bands are more expensive to get going in terms of an all year round\nsetup and require more thought around design, however on the upside, antenna\nsystems are smaller and lighter and you can stack multiple antennas to increase\ntransmitted and received gain (<i>This will be covered in a separate article<\/i>).<o:p><\/o:p><\/p>\n<h2>3. Operating Procedure.<\/h2>\n<p class=\"MsoNormal\">I&#8217;ll discuss the standard MS operating procedure in this\nsection with a few examples of contacts I&#8217;ve made using Meteor Scatter and for\nthe purposes of this article I&#8217;ll only be making reference to the MSHV Data\nmode software designed and provided by&nbsp;Christo, LZ2HV.<br>\nI&#8217;ll also discuss the different data modes available in the software and their\nuse cases, however the primary focus will be on using the following modes:<o:p><\/o:p><\/p>\n\nFSK441\nJTMS\nMSK144\n\n<p class=\"MsoNormal\">To get started with an MS QSO, you have two options:<br>\n1. Tune your radio to the Meteor Scatter calling frequency and configure the\nMSHV software to call CQ.<br>\n2. Arrange a Sked with another station on a particular frequency and data mode.<br>\n<br>\nOption 1 is more common during a major Meteor Shower such as the Geminids,\nhowever I&#8217;ve had many successful contacts by calling CQ with no prior arranged\nSked.<br>\n<br>\nOption 2 arrange a Sked, but what is a &#8220;Sked&#8221; you may ask?<br>\nWell it\u2019s an abbreviated term for a Scheduled Contact and this is normally\narranged by using an internet based chatroom, the main one being used today is provided\nby a Radio Amateur ON4KST whose website-based chatroom is available free to use\n(link in the<a href=\"https:\/\/hamradiotoday.uk\/meteorscatter\/getting-started-with-meteor-scatter\/#RESOURCES\">&nbsp;resources\nsection&nbsp;<\/a>below).<br>\nThere is also a much more feature-rich software package written by Nick, US8AR\ncalled KST Chat which uses the ON4KST Chat Server but Nick&#8217;s software provides\nmuch more functionality and is kindly provided free of charge to the HAM Radio\ncommunity, download link in the&nbsp;<a href=\"https:\/\/hamradiotoday.uk\/meteorscatter\/getting-started-with-meteor-scatter\/#RESOURCES\">resources\nsection<\/a>&nbsp;below.<o:p><\/o:p><\/p>\n<h2 id=\"FSK441\">FSK441<\/h2>\n<p class=\"MsoNormal\">FSK441 uses four-tone frequency shift keying at 441 baud.\nThe frequencies of the audio tones are 882, 1323, 1764, and 2205 Hz. Each\nencoded character uses three tone intervals and therefore requires 3\/441\nseconds (approximately 2.3 ms) for transmission. FSK441 accommodates an\nalphabet of 43 characters.<br>\nFSK441 is a great mode and its my go-to choice for Meteor Scatter operating due\nto its inherent capability to allow for partial decoding of messages,\nespecially at 144MHz where MS reflections can be very short and weak in signal strength.<\/p>\n\n<h2 id=\"JTMS\">JTMS<\/h2>\n<p class=\"MsoNormal\">JTMS uses Minimum Shift Keying (MSK) at 11025 \/ 8 = 1378.125\nbaud. Messages are free-form and have lengths 5,7,9,11,13,17,19,23 or 29\ncharacters, padded when required with one or more trailing blanks. Characters\nare mapped to numerical values in the range 0 to 63 according to position in\nthe first line below. (The second and third lines may be used to read off an\nindex value: for example, B has the value 11 and ? is 38.).<br>\nAgain, another favourite of mine and is very similar to FSK441 behaviour,\nhowever JTMS will produce less &#8220;garbage&#8221; decodes at lower signal\nlevels compared to FSK441.<o:p><\/o:p><\/p>\n\n<h2 id=\"MSK144\">MSK144<\/h2>\n<p class=\"MsoNormal\">MSK stands for minimum shift keying, a form of\ncontinuous-phase frequency-shift keying (FSK) with shift equal to half the baud\nrate. MSK144 uses message frames of 144 bits and modulation at tone frequencies\n1000 and 2000 Hz to transmit channel symbols at keying rate of 2000 baud.<br>\nThis mode differs in several ways from FSK441 and JTMS, MSK144 is a\nsemi-automated mode by way it&#8217;ll automatically decode a received MS ping in real-time\nduring the receive cycle and set the transmit cycle to the next stage, however\nunlike JTMS and FSK441, MSK144 will not offer a partial decode or decode anything\nbelow a certain signal strength making it useless for weak signal MS work\noutside of a major shower.<br>\nMSK144 is very good during a shower like the Geminids because it&#8217;ll allow for\nrapid, semi-automated contacts to be made or in a pile-up situation it can\nprove a very useful tool.<o:p><\/o:p><\/p>\n\n<p>So now that we understand a little more about the various data modes available to us and how they differ in application, lets go through the standard operating procedure prior to getting on the air so you have a clear understanding of how to play the game.<\/p>\n<p class=\"MsoNormal\">I&#8217;ll try and keep this as brief and clear as possible, if\nany more experienced readers feel I&#8217;ve made an error or would like more context\nadded that may be of benefit to a newcomer, please feel free to get in touch.<o:p><\/o:p><\/p>\n\nArrange a Sked\nConfigure the QSO\nConfirm\nRun\nMonitor\nComplete QSO\n\n<h2 id=\"THESKED\">Arrange a Sked<\/h2>\n<p>Using the KST Chat software or the ON4KST Website Chatroom, make contact with another active user and ask if they would like to have a sked, propose and agree a frequency and data mode.<\/p>\n<h2 ID=\"CONFIGURE\">Configure the QSO <\/h2>\n<p>Take note of the station you&#8217;re in the sked with and add their callsign and Maidenhead Locator to the MSHV software, in the following examples we&#8217;ll use an FSK441 MS Sked.<br>As a rule of thumb, if the station you&#8217;re going to be working is East of your location then you will transmit in the second period and if the station is West of your location, you transmit in the first period, this is controlled by the TX FIRST &#8211; TX SECOND radio buttons in the MSHV software.<\/p>\n<p><strong>Typical Checklist<\/strong><\/p>\n\nAdd Callsign\nAdd Maidenhead Locator (this might automatically populate, if not find it)\nSet the Radio Frequency agreed on the Sked\nSet the Datamode agreed in Sked from the MSHV menu\nClick the GEN MSG button in the MSHV Software to generate the messages for the QSO\nConfirm the agreed transmit period by selecting TX FIRST or TX SECOND in the MSHV software\nSet and confirm the agreed transmit\/receive cycle duration, normally 30 seconds, by setting the value in the TX\/RX box in MSHV software\n\n\n<h2 id=\"CONFIRMSKED\">Confirm the Sked<\/h2>\n<p>Now you&#8217;ve configured the software and radio for the QSO, return to where the Sked was arranged e.g. KST Chat, SMS, WhatsApp etc and confirm back the QSO settings with the other operator so you&#8217;re both in agreement and there&#8217;s no chance of incorrect configuration or doubt.<\/p>\n<h2 id=\"RUNQSO\" >Run<\/h2>\n<p>Once you&#8217;re ready, notify the other operator you&#8217;re running and simply click the AUTO IS OFF button in the MSHV software, which will turn on AUTO TX\/RX cycling at the period set e.g. You&#8217;ll transmit for 30 seconds and receive for 30 seconds either in the first or second period as agreed in the Sked.<\/p>\n<h2 id=\"MONITORQSO\">Monitor QSO<\/h2>\n<p class=\"MsoNormal\">MSHV will try and automatically decode meteor pings or\nbursts, but sometimes you have to do it manually, so if you hear a\n&#8220;zap&#8221; or &#8220;ping&#8221; in the radio speaker when receiving, use\nthe computer mouse to click inside the waterfall in the MSHV software which\nshould show you something like in the image below:<o:p><\/o:p><\/p>\n\n<p>Once you&#8217;ve read the decoded message, you must then advance the QSO on to the next stage, in the above example I decoded Peter, SM2CEW which was a fairly loud burst of data, now I would send him my report, in this case the report was 48.<br>I changed the report from the default 26 to 48 to correctly report his signal, you can do this in the software by simply taking note of the report in the MSHV window in the &#8220;Rpt&#8221; column and entering it in the TX RPT box and re-generating the TX messages by clicking on the GEN MSG button again, then once this is complete move the TX sequence on to the next stage which would be TX2 in this example.<br>Now I&#8217;m transmitting the following message to Peter, SM2CEW M0XXQ 48 48, assuming once Peter receives this message from me, he would then advance his TX Sequence to acknowledge the report by sending back my report, assuming Peter decoded my signal with a report of 28 he would reply R28 with the following example message: M0XXQ SM2CEW R28 R28<br><br>See the image below as an example:<br><\/p>\n\n<p>Now that I&#8217;ve received Peters report back to me, I must send my final transmit sequence which formalises and completes the MS QSO in the following format: RRRR RRRR M0XXQ<br>Once Peter receives this message the QSO is complete, it is not required to send 73 message in order to make the QSO valid, although many operators do this as a courtesy.<\/p>\n<h2 id=\"COMPLETEQSO\">Complete QSO<\/h2>\n<p>Now I would head back to the source of the Sked, in most cases KST Chat, and wait for Peter to messge me in the chat to say he&#8217;s received my final RRR message, at this point a log entry will be made and a report sent to the DX Cluster to record the MS QSO and we&#8217;d typically exchange greetings and finish at this point.<\/p>\n<h2 id=\"RESOURCES\">4. Resources.<\/h2>\n\n\n\n\n<p><br><\/p>\n\n\n\n\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"open","ping_status":"closed","template":"","meta":{"pagelayer_contact_templates":[],"_pagelayer_content":"","footnotes":""},"class_list":["post-192","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/pages\/192","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/comments?post=192"}],"version-history":[{"count":77,"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/pages\/192\/revisions"}],"predecessor-version":[{"id":302,"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/pages\/192\/revisions\/302"}],"wp:attachment":[{"href":"https:\/\/hamradiotoday.uk\/meteorscatter\/wp-json\/wp\/v2\/media?parent=192"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}